Otherwise, you can not access your valuable data.ĮaseUS Data Recovery Wizard is a robust hard disk recovery tool that can get your data back from corrupted, inaccessible, and RAW hard disks. If the above methods can not fix M.2 SSD is not recognized in Windows 10/11, what to do next is to retrieve your data back via a data recovery software - EaseUS Data Recovery Wizard. Right-click your SSD and choose 'Change Drive Letter and Paths.'Ī Solution to Recover Data from M.2 SSD that is Not Detected It will what problem you need to fix if your computer has. Step 1. Type Hardware and Devices on the search box and click to start. Fix 2 - Use Hardware and Devices Troubleshooter. Wait until the update completes and restart your computer. Theres a possibility that the SATA cable connection fault, I mean loose. Go to BIOS screen and check whether the SATA mode is in AHCI, also while you are in the same tab, click F9 on the keyboard to set it to 'Setup Defaults'. Could you please post the Disk management picture.

In the update driver software window, choose 'Search automatically for updated driver software'. Acer Nitro 5 AN515-43 Hdd Installed but not recognized in bios. Right-click M.2 SSD and choose 'Update Driver Software'.

Press 'Windows + X' and click 'Device Manager'. If the M.2 SSD is not showing up in disk management, you can update your driver, apply Hardware and Device Troubleshooter and assign a drive letter by this in-depth guide.

On laptop: Open M.2 slot > Slide M.2 SSD to the slot > Secure SSD with the screw.

On desktop PC: Find M.2 connector on the lower middle of the motherboard > You can see a horizontal slot labeled SATA or PCIe > Remove the mounting screw opposite the slot > Insert the M.2 SSD > Secure the SSD with the screw.

(Or disassemble your laptop's shell by removing some screws.) (If you are using the laptop, you can take out the battery.) Solution 2 - Reinstall Drive to Fix M.2 Drive Not Detected In Windows 10/11 Expand 'SATA Configuration' and choose 'Configure SATA Configuration as IDE'. Restart PC and press F2/Delete to access BIOS. Solution 2 involves disassembling the computer and reinstalling the hard disk, which may be hard if you are a beginner.

Your M.2 SSD is not properly connected to the computer.įor the BIOS issue, you can try two ways in this part.

You have not configured your BIOS setting.

Maybe you should look at the following reasons first and try more methods. Many users talk about a method that doesn't work. Full stepsīefore you using the solution, let's take a look at what causes disk failure. You can use professional data recovery software to restore data from M.2 SSD to prevent data loss. Recover Data from M.2 SSD That is Not Detected When M.2 SSD is not showing up in Disk Management, update its driver, use Hardware and Devices. To fix M.2 SSD not detected in BIOS, you can configure your M.2 SSD in BIOS or reinstall the drive. Your computer can't detect M.2 SSD when you haven't configured your BIOS setting or M.2 SSD is not properly connected.

Sandisk ssd not detected in bios